Make sure this fits
by entering your model number.
ãRepairing the threaded holeãYou can repaire the threaded hole in a costeffective manner.Repairing the threaded hole in a costeffective manner when a thread error occurs or a damaged female threaded hole is repaired,used for frequent disassembly, it can greatly improve the life of thread.
ãConvenient convertionãWire thread inserts are also called threaded sheaths, stainless steel threaded sleeves, wire sleeves.The product works for convert between metric and inch thread holes, which is convenient and fast.
ãStandard female thread ãThe repair nut is an industrial fastening part, which is mostly used with screws or polts.If you fit the wire screw set in the screw hole of the workpiece of aluminum alloy and other materials,will forming a highstrength, wearresistant, highaccuracy standard female thread.
ãStainless steelãThe thread inserts has standard size, clear thread, more accurate repairing thread movable teeth, adopts 304 stainless steel material, high hardness, good toughness and wear resistance, good corrosion resistance, and is not easy to break when repairing thread hole.
ãCustomer supportãWe attach importance to the feedback from every customer and always provide excellent customer service.
Specification: Item Type: Thread Repair Material: SUS304 Model: M12 x 1.75 Thread Specification: M12 x 1.75 Outside Diameter Before Installation: Approx. 14.3-14.8mm / 0.56-0.58in Drill Bit Diameter: Approx. 12.4mm / 0.5in 1D Length After Installation: Approx. 12mm / 0.5in Number of Turns Before Installation: 5.3 1.5D Length After Installation: Approx. 18mm / 0.7in Number of Turns Before Installation: 8.4 2D Length After Installation: Approx. 24mm / 0.9in Number of Turns Before Installation: 11.6 2.5D Length After Installation: Approx. 30mm / 1.2in Number of Turns Before Installation: 14.8Â 3D Length After Installation: Approx. 36mm / 1.4in Number of Turns Before Installation: 18 Wire Thread Insert Model Description: For Example: M3 x 0.5 x 1.5D, which means that after the screw set is completed, the female thread is M3, the pitch is 0.5, and the length is 1.5D (length is 1.5 times the diameter, that is, 1.5 x 3=4.5mm ), the length here refers to the length after installation. Wire thread inserts are also called threaded sheaths, stainless steel threaded sleeves, wire sleeves, and braces. They are a new type of internal threaded fasteners made of high-strength, high-accuracy diamond-shaped cross-section steel wires; Application to low-strength engineering materials such as aluminum alloy, zinc alloy, copper, plastic, etc., can significantly improve thread strength and wear resistance.